水冷式冷凍機における熱媒油の安全性
In order to achieve better operating efficiency, water-cooled chillers need to choose branded heat transfer oil, but you need to pay attention to safe placement, a little carelessness will cause adverse effects.
Although the heat transfer oil of the water-cooled chiller has a higher boiling point, it is still a flammable liquid. Therefore, you should pay attention to safety when using it. Improper use may cause fire. The cause of the fire is caused by leakage. There are four main types of leakage and fire:
A. Fire in the heat preservation area.
Common misfire types in organic heat transfer oil systems. The heat transfer oil leaks at the instrument connection and penetrates into the heat preservation area. Then, in the presence of air, the circulating liquid and pipe heat will heat the heat conduction oil and gradually oxidize the liquid, causing the heat preservation area to be ignited and cause a fire.
B. Fire caused by pipeline leakage or burst.
The leakage or burst of the pipeline caused the heat transfer oil to flow into the hot gas flame zone and cause a fire.
C. The flash point causes a fire.
The factors that cause the flash point fire are higher than the low flash point temperature of the heat transfer oil, and there are heat transfer oil, air and fire sources at the same time.
D. Fire caused by process raw materials:
The main reason is that the heat-conducting oil leaks into the heating system, and its process raw materials are easily oxidized and have oxidizing substances, which causes a fire.
In addition to the above four types of fires, more attention should be paid to the use of gas-phase systems. If a large amount of heat transfer oil vapor leaks, aerosol mist may be formed. This mist may cause explosion and combustion in the air when exposed to an open flame.
Therefore, the heat transfer oil of water-cooled chillers is related to its operating efficiency and safety, so it is necessary to do a good job in the repair and maintenance of the hot oil system to prevent the leakage of the heat transfer oil.
関連推奨品
-
統合制御システム高温・低温サイクル装置 ZLFシリーズ使用項目
2048社会の発展に伴い、化学工業はさらに発展し、原子炉の温度システム制御が強化され、監視環境を良好な状態に保ち、温度...
詳細を見る -
UVエッチング装置水冷用チラーのメンテナンス
2190紫外線エッチング機械水冷の単位スリラーは一種の産業生産で広く利用された冷凍装置です。それは異なった工業生産に有効な冷却環境を提供でき、大きい対流を提供できます。
詳細を見る -
電子部品試験用冷暖房サーモスタット
2097企業が電子部品試験用の冷暖房サーモスタットを長期間故障なく稼働させたい場合、安定した設備性能を維持するために以下の点を実現する必要がある。1.適切な作業環境
詳細を見る -
異なる構成の高圧反応器による高温-低温制御システム
1633高圧反応器の異なる構成、異なるメーカーがもたらす製品の品質は同じではないが、注意すべき点は同じで、あなたはそれに注意する必要があります。1.1、指定された場所で使用することと...
詳細を見る
工業冷水機製造商 LNEYA Taiwan











