Semiconductor refrigeration temperature control table cooler operation instructions
The power supply switching of the control system of the transformer cooling system of the semiconductor refrigeration temperature control station uses the imported dual power automatic switching device. Its main function is automatic switching between the active and standby working power sources. When the common power failure occurs, it automatically switches to the standby power supply. When both power supplies are normal, the common power supply works and the standby power supply is in standby state. The semiconductor refrigeration temperature control station programmable controller (PLC) is the control center of the execution part of the strong oil air cooler control device. It receives various status signals from the transformer to control the execution part.
When the transformer of the semiconductor refrigeration temperature control console is put into operation, a group of coolers will be put into operation, that is, the working group cooler is operated. The auxiliary cooler is controlled according to the oil surface temperature of the transformer, the winding temperature, the load signal, etc., and the auxiliary cooler can be activated as follows. The cooling method of the semiconductor refrigeration temperature control transformer is forced oil circulation air cooling, and at least one group of coolers should be operated after the transformer is put into operation. The control box of the semiconductor refrigeration temperature control station is controlled by intelligent equipment, and the cooling device for controlling the transformer is mainly controlled by a main switch such as a change switch on the control panel.
The structure and operation description of the semiconductor refrigeration temperature control station are as shown above. When the user operates the semiconductor refrigeration temperature control station, the operating efficiency of each component is ensured as much as possible, so that the overall operating efficiency of the semiconductor refrigeration temperature control station can be improved.
Recommandations connexes
-
Instructions de préparation pour le test de puce dédié à la série TES-5
1882La série TES-5 pour le test des puces est utilisée pour le test des composants électroniques. La détection précise de la puce est très importante. Que savez-vous donc de la préparation des tests de la série TES-5 pour les tests de puce ? Avant de commencer le test TES-5 s...
Voir les détails -
What model of industrial refrigerator is used for freezing workpieces?
1930What is a workpiece freezer-industrial cold-shrink assembly technology-extended life, metal cold treatment is to put a metal or alloy workpiece in a certain medium and heat it to a suitable temperature, and keep it in this temperature for a certai...
Voir les détails -
Principe de fonctionnement des refroidisseurs industriels à air LNEYA
2537Les refroidisseurs industriels à air sont des échangeurs de chaleur qui utilisent l'air pour refroidir le fluide chaud. Le fluide chaud dans le tube est réchauffé par l'échange de chaleur entre la paroi du tube, l'ailette et l'air extérieur, qui est généralement fourni par le système de ventilation....
Voir les détails -
Méthode de dépannage pour le dispositif de réfrigération de l'eau froide refroidie par air mécanisme de réaction chimique
2203If air enters into the air-cooled cold water mechanism refrigeration unit system of the chemical reaction kettle, the impact will be many. Enter the air circulation system first, the pressure will rise, the heat dissipation effect of the condenser...
Voir les détails
工業冷水機製造商 LNEYA Taiwan











