Relationship Between Poor Refrigeration Performance And Refrigerant In Low Temperature Industrial
The effect of the refrigeration system of the low-temperature industrial refrigerator is directly related to the refrigerant. Once the refrigerant leaks, the cooling capacity will be insufficient, so that the suction and exhaust pressures are relatively low, and the expansion valve and the evaporator are in operation. The balance pressure cannot be maintained. Therefore, if the refrigerant leaks from the low-temperature industrial refrigerator (group) is found, it is not rushed to fill the system with the refrigerant. Instead, the leak point should be immediately found and the refrigerant should be filled after repair.
In the refrigeration system of the low-temperature industrial refrigerator (group), pay attention to the amount of refrigerant, too little, too much, too much, too much may cause the exhaust pressure of the low-temperature industrial refrigerator to rise, higher than the normal value, need to stop in time, use High pressure exhaust removes excess refrigerant from the system.
If the low-temperature industrial refrigerator (group) is filled with too much refrigerant after maintenance, the cooling effect will be worse, because the charge of the refrigerant will occupy a part of the condenser of the low-temperature industrial refrigerator (group), which is reduced. The cooling area and cooling efficiency are also decreasing, and the cooling rate is continuously decreasing. Therefore, according to the operation sequence, after the machine is shut down for a few minutes, excess refrigerant is released at the high pressure shut-off valve, and the residual air in the system can be released at the same time.
Of course, the refrigeration system inside the low-temperature industrial refrigerator (group) also needs to pay attention to, once the air in the low-temperature industrial freezer (group) refrigeration system will reduce the cooling efficiency, this time can be several times after a few minutes after the shutdown The high pressure shut-off valve releases air, and it is also possible to properly fill some refrigerant according to the actual situation.
The refrigeration effect of the low-temperature industrial refrigerator (group) is closely related to the amount of refrigerant. Therefore, users should pay attention to the refrigeration effect in time and strive for better operation of the low-temperature industrial refrigerator (group).
Похожие рекомендации
-
Принципиальный анализ гликолевого чиллера
2000Glycol chiller is an industrial chiller with glycol as refrigerant. The structure of glycol chiller is roughly the same as that of ordinary industrial chiller, which is composed of compressor, evaporator, condenser and electric control system....
Посмотреть детали -
Heat sink temperature application note
2010As we all know, the semiconductor industry has certain characteristics, small size, high reliability, wide working range, and has a wide range of applications in the civilian, industrial and other fields of semiconductors, but with the increasing ...
Посмотреть детали -
The ethylene glycol chiller solution is too cold and too hot
2115When the ethylene glycol chiller solution is overheated and overcooled during operation, if you don't understand these conditions well, you will not be able to operate the equipment well. The supercooling phenomenon of the solution of the glycol...
Посмотреть детали -
Рекомендация по новому продукту - небольшой настольный циркуляционный охладитель FL-800N
2229В последние годы, в связи с бурным развитием фармацевтической промышленности, стремительно развивается и индустрия фармацевтического оборудования. В связи с этим компания Lneya выпустила небольшой настольный циркуляционный холодильник FL-800N, который был положительно воспринят рынком...
Посмотреть детали
工業冷水機製造商 LNEYA Taiwan











