Система управления температурой охлаждения и нагрева для нескольких реакторов
1. There are some differences in the quality and configuration of the refrigeration and heating temperature control systems of multiple reactors from different manufacturers. Some equipment will have some noise during operation, and the noise is largely related to mechanical stress.
2. You can check whether the screws on the base of the equipment are normal, whether the force is uniform, and whether they are fixed. If the screws of the unit are loose, use a wrench to tighten the screws of the lower base.
3. The operator has a clear understanding of the operation instructions and maintenance knowledge of the refrigeration and heating temperature control systems of multiple reactors.
4. Do a good job in the maintenance and cleaning of the key components of the refrigeration, heating and temperature control systems of multiple reactors.
5. Protect the key parts of the equipment. If it is easy to get wet, it is necessary to do a good job of anti-layer work.
6. For the heat preservation treatment of the refrigeration and heating temperature control systems of multiple reactors, due to the large number of internal parts, it is necessary to ask technical personnel to operate under the guidance.
7. In order to obtain better treatment effect, enterprises need to choose good thermal insulation materials when completing thermal insulation treatment. Good thermal insulation effect will help to improve the operation effect of the equipment and reduce the failure rate of the equipment.
8. The installation of the circulating pipeline should facilitate the discharge of the gas in the pipeline. If there is leakage, stop the operation in time and use it after repairing; the electric control cabinet should avoid dust accumulation, and should be regularly purged with compressed air to ensure good electrical contact. Always check the contacts of electric heating tubes, fuses, meters, electric contact pressure gauges, and relays.
Our LNEYA dynamic temperature control system SUNDI series, HR series and WTD series can be used for temperature control of reactors, and one or more units can be controlled at the same time. If you have needs in this regard, you can leave us a message and send an email to sales@lneya.com
Похожие рекомендации
-
About the components of the reactor chiller refrigeration heating circulator
2313The reactor chiller refrigeration and heating circulator is used to control the heater and cooler, adjust the temperature, and maintain the stable temperature of the material. Through the circulating medium, the temperature of the material can be ...
Посмотреть детали -
Auxiliary equipment for LNEYA glass reactor system
1406Metal jacketed glass reactor system Mechanical seal stainless steel jacket connected cylindrical glass container PTFE gasket seal top flange and stainless steel jacket; With insulation layer, the outer layer is stainless steel SUS layer; The geo...
Посмотреть детали -
ЛНЕЯ: Сосредоточьтесь на каждой детали, чтобы создать блестящий
2155LNEYA использует выдающиеся таланты в области температурного контроля охлаждения и отопления, и имеет сильную техническую базу. Она имеет хорошо известную команду высококлассных исследователей и разработчиков в отрасли. Это высококлассная команда по исследованиям и разработкам и применению ф...
Посмотреть детали -
Control method for semiconductor test chiller to meet temperature requirements
2114The biopharmaceutical field requires high-precision temperature to control the activity of enzymes and the production of products; the chemical industry field requires specific temperatures to make chemical reactions proceed stably; the electronic...
Посмотреть детали
工業冷水機製造商 LNEYA Taiwan











