Buscar en toda la estación
¿Cómo instalar y depurar el sistema eléctrico de la cámara de pruebas de cambio rápido de temperatura? Necesidad de referirse a los siguientes métodos para la distribución de energía, prestar atención a la capacidad de la fuente de alimentación, no utilice una sola fuente de alimentación para múltiples e...
Ver detalles
The ultra-high temperature material impact test chamber test device has too much frozen oil in the evaporator, which can also cause insufficient cooling and cause slow cooling. The oil stored in the evaporator of the ultra-high temperature materia...
Ver detalles
Product Overview: Microcomputer control, multiple security protection, and more reliable operation; Single-compressor automatic cascade supercooling refrigeration technology; compressors use Secop and France Taikang brand Contactors and circuit br...
Ver detalles
The high temperature test equipment is mostly caused by water shortage in the water circulation. This way, the purified water is replenished to the water tank until the water level meter on the lower right side of the water tank reaches about 80% ...
Ver detalles
En la cámara centrífuga de pruebas ambientales a pequeña escala, el dispositivo de recuperación de la succión es generalmente un sistema independiente y, si es necesario, la tubería conectada al condensador y al evaporador puede cerrarse para su mantenimiento por separado. Después de r...
Ver detalles
Aplicación:1. El objeto sometido a prueba se conecta a un adaptador de plataforma de prueba.2. Las partes internas de las piezas se enfrían, calientan, controlan el flujo y la presión mediante diversos aceites lubricantes, aceites hidráulicos, combustible de aviación, aceite combustible y co...
Ver detalles
In the pipeline selection of new energy thermal management, if the use of improper/damaged hoses and/or hose joints will result in injury, the new energy thermal management is limited by the temperature, caliber, installation method, etc. Tube, me...
Ver detalles
Before starting the linear rapid temperature change tester, check whether the relevant protective measures are in place, such as fire protection, protection, leak prevention and other tools. Check whether the power supply is in place according to ...
Ver detalles
The injection molding machine cooling system lubricating oil needs to pay attention to the type of compressor when selecting. The compressor has three types: piston type, screw type and centrifugal type. The first two kinds of lubricating oil are ...
Ver detalles
The failure of the low temperature circulation device frosting is mainly because the compressor return air temperature is too low, which may be that the throttle valve liquid refrigerant supply is in a normal state in the low temperature circulati...
Ver detalles
工業冷水機製造商 LNEYA Taiwan
