Refrigeration and heating temperature control system for multiple reactors
1. There are some differences in the quality and configuration of the refrigeration and heating temperature control systems of multiple reactors from different manufacturers. Some equipment will have some noise during operation, and the noise is largely related to mechanical stress.
2. You can check whether the screws on the base of the equipment are normal, whether the force is uniform, and whether they are fixed. If the screws of the unit are loose, use a wrench to tighten the screws of the lower base.
3. The operator has a clear understanding of the operation instructions and maintenance knowledge of the refrigeration and heating temperature control systems of multiple reactors.
4. Do a good job in the maintenance and cleaning of the key components of the refrigeration, heating and temperature control systems of multiple reactors.
5. Protect the key parts of the equipment. If it is easy to get wet, it is necessary to do a good job of anti-layer work.
6. For the heat preservation treatment of the refrigeration and heating temperature control systems of multiple reactors, due to the large number of internal parts, it is necessary to ask technical personnel to operate under the guidance.
7. In order to obtain better treatment effect, enterprises need to choose good thermal insulation materials when completing thermal insulation treatment. Good thermal insulation effect will help to improve the operation effect of the equipment and reduce the failure rate of the equipment.
8. The installation of the circulating pipeline should facilitate the discharge of the gas in the pipeline. If there is leakage, stop the operation in time and use it after repairing; the electric control cabinet should avoid dust accumulation, and should be regularly purged with compressed air to ensure good electrical contact. Always check the contacts of electric heating tubes, fuses, meters, electric contact pressure gauges, and relays.
Our LNEYA dynamic temperature control system SUNDI series, HR series and WTD series can be used for temperature control of reactors, and one or more units can be controlled at the same time. If you have needs in this regard, you can leave us a message and send an email to sales@lneya.com
Verwandte Empfehlungen
-
Application of Industrial Air-Cooled Chiller in Chemical Industry
2247Industrial air-cooled chillers are applicable to glass reactors, metal reactors and bioreactors for temperature control. In the field of chemistry and pharmacy, air-cooled chillers usually carry out necessary temperature control together with the ...
Details anzeigen -
Auswirkungen des Kühl- und Heizsystems auf den Glasreaktor
2113Der Glasreaktor hat ein kompaktes Volumen und eine übersichtliche Struktur und kann bequem und flexibel in Reihe und parallel betrieben werden, so dass er verschiedenen Prozessanlässen gerecht wird; der Reaktionsweg hat keinen Metallkontakt, und die...
Details anzeigen -
Anwendungshinweis für einen Tieftemperatur-Kühlschrank für die Kaltschrumpfmontage von Automobilmotorteilen
2329Die Motorenmontage erfolgt in einer Tieftemperaturumgebung unter minus 30°C in einem Tiefkühlschrank. Die großen Automobilmotorenhersteller verfügen über eigene Tieftemperatur-Montagewerkstätten. Motoren, die in einer Tieftemperatur...
Details anzeigen -
Welche Vorsichtsmaßnahmen sind bei der Auswahl eines industriellen Kühlers zu beachten?
1620Ein industrieller Kaltwassersatz ist ein Kühlgerät, das eine Kältemaschine, einen Verflüssiger, einen Verdampfer, ein Expansionsventil, ein Regelsystem und einen Schaltkasten auf einem gemeinsamen Sockel oder Rahmen umfasst. Je nach der Art der Wärmeabfuhr des Geräts kann es in zwei Gruppen unterteilt werden:...
Details anzeigen
工業冷水機製造商 LNEYA Taiwan











