How to maintain stable performance of biopharmaceutical laboratory oil cooler?
1. A suitable working environment to prevent various failures of the oil cooler in the biopharmaceutical laboratory needs to provide a better operating environment for the equipment. Keep the environment clean and tidy, reduce the impact of various types of dust, thereby improving the stability of heat dissipation, improving the cooling performance, reducing the ambient temperature in a shorter period of time, and reducing the energy consumption of equipment used by enterprises.
2. Maintain a low failure rate, and carry out meticulous maintenance and maintenance on a daily basis. At the same time, operators are required to complete the opening and closing of the equipment according to the use steps required by the manufacturer, so as to avoid wrong operation behaviors and lead to the use of oil coolers in biopharmaceutical laboratories. Life is affected, and even various failures continue to occur.
3. Timely maintenance of minor faults requires the company to timely and effectively complete the entire maintenance process for the failure of the oil cooler in the biopharmaceutical laboratory to reduce the impact of minor faults.
4. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
5. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
6. When an alarm occurs, the meaning of the alarm should be judged in time. If it cannot be solved by itself, it should be reported to the refrigerator manufacturer for repair to avoid the expansion of the fault range and the overrun of the maintenance cost.
7. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
8. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
In addition to the above methods, the operation management of the oil cooler in the biopharmaceutical laboratory is also very critical. Mastering the scientific operation procedures, maintenance and repair methods of the equipment, as well as the management of the maintenance, transformation and disposal of the refrigeration unit can ensure that the equipment is always in good condition. operating status.
Related recommendations
-
Principle of TCU temperature control system
2563Use area: can be used in various explosion-proof areas The temperature control unit (TCU) is mainly used in reactor heating, cooling temperature control in fine chemical, chemical pharmaceutical, and biopharmaceutical processes. It can realize aut...
View details -
Introduction of temperature control equipment for cannabis extraction
2070CO2 is a unique solvent because its dissolving power can be changed by simply adjusting the temperature and pressure during the extraction process. When the pressure and temperature of CO2 are higher than 1083 psi and at 88F, CO2 is considered sup...
View details -
What do You Know about Centrifugal Cryogenic Chillers before Use?
2192There are some differences in the use of cryogenic chillers between different compressors, but not very much of it. Due to the different styles of different compressors, the points to pay attention to during operation are also different. For examp...
View details -
How to control the temperature of solvent recovery by distillation?
19781. If the product quality is not affected by the presence of air at a higher temperature, it can be recovered at normal pressure first, and when the temperature exceeds the normal pressure boiling point of the desolvent by 10 degrees, when the so...
View details
工業冷水機製造商 LNEYA Taiwan











